Struct Config
pub struct Config {Show 17 fields
pub dir: String,
pub spill_dir: Option<String>,
pub recovery_mode: RecoveryMode,
pub recovery_read_block_size: ReadableSize,
pub recovery_threads: usize,
pub batch_compression_threshold: ReadableSize,
pub compression_level: Option<usize>,
pub bytes_per_sync: Option<ReadableSize>,
pub format_version: Version,
pub target_file_size: ReadableSize,
pub purge_threshold: ReadableSize,
pub purge_rewrite_threshold: Option<ReadableSize>,
pub purge_rewrite_garbage_ratio: f64,
pub memory_limit: Option<ReadableSize>,
pub enable_log_recycle: bool,
pub prefill_for_recycle: bool,
pub prefill_limit: Option<ReadableSize>,
}
Fields§
§dir: String
Main directory to store log files. Will create on startup if not exists.
Default: “”
spill_dir: Option<String>
Auxiliary directory to store log files. Will create on startup if set but not exists.
Newly logs will be put into this dir when the main dir
is full
and no spare space for new logs.
Default: None
recovery_mode: RecoveryMode
How to deal with file corruption during recovery.
Default: “tolerate-tail-corruption”.
recovery_read_block_size: ReadableSize
Minimum I/O size for reading log files during recovery.
Default: “16KB”. Minimum: “512B”.
recovery_threads: usize
The number of threads used to scan and recovery log files.
Default: 4. Minimum: 1.
batch_compression_threshold: ReadableSize
Compress a log batch if its size exceeds this value. Setting it to zero disables compression.
Default: “8KB”
compression_level: Option<usize>
Acceleration factor for LZ4 compression. It can be fine tuned, with each successive value providing roughly +~3% to speed. The value will be capped within [1, 65537] by LZ4.
Default: 1.
bytes_per_sync: Option<ReadableSize>
Deprecated. Incrementally sync log files after specified bytes have been written. Setting it to zero disables incremental sync.
Default: “4MB”
format_version: Version
Version of the log file.
Default: 2
target_file_size: ReadableSize
Target file size for rotating log files.
Default: “128MB”
purge_threshold: ReadableSize
Purge append log queue if its size exceeds this value.
Default: “10GB”
purge_rewrite_threshold: Option<ReadableSize>
Purge rewrite log queue if its size exceeds this value.
Default: MAX(purge_threshold
/ 10, target_file_size
)
purge_rewrite_garbage_ratio: f64
Purge rewrite log queue if its garbage ratio exceeds this value.
Default: “0.6”
memory_limit: Option<ReadableSize>
Maximum memory bytes allowed for the in-memory index.
Effective under the swap
feature only.
Default: None
enable_log_recycle: bool
Whether to recycle stale log files.
If true
, logically purged log files will be reserved for recycling.
Only available for format_version
2 and above.
Default: true
prefill_for_recycle: bool
Whether to prepare log files for recycling when start.
If true
, batch empty log files will be prepared for recycling when
starting engine.
Only available for enable-log-reycle
is true.
Default: false
prefill_limit: Option<ReadableSize>
Maximum capacity for preparing log files for recycling when start.
If None
, its size is equal to purge-threshold
*1.5.
Only available for prefill-for-recycle
is true.
Default: None
Implementations§
Trait Implementations§
§impl<'de> Deserialize<'de> for Config
impl<'de> Deserialize<'de> for Config
§fn deserialize<__D>(
__deserializer: __D,
) -> Result<Config, <__D as Deserializer<'de>>::Error>where
__D: Deserializer<'de>,
fn deserialize<__D>(
__deserializer: __D,
) -> Result<Config, <__D as Deserializer<'de>>::Error>where
__D: Deserializer<'de>,
§impl Serialize for Config
impl Serialize for Config
§fn serialize<__S>(
&self,
__serializer: __S,
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>where
__S: Serializer,
fn serialize<__S>(
&self,
__serializer: __S,
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>where
__S: Serializer,
impl StructuralPartialEq for Config
Auto Trait Implementations§
impl Freeze for Config
impl RefUnwindSafe for Config
impl Send for Config
impl Sync for Config
impl Unpin for Config
impl UnwindSafe for Config
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T, V> Convert<T> for Vwhere
V: Into<T>,
impl<T, V> Convert<T> for Vwhere
V: Into<T>,
fn convert(value: Self) -> T
fn convert_box(value: Box<Self>) -> Box<T>
fn convert_vec(value: Vec<Self>) -> Vec<T>
fn convert_vec_box(value: Vec<Box<Self>>) -> Vec<Box<T>>
fn convert_matrix(value: Vec<Vec<Self>>) -> Vec<Vec<T>>
fn convert_option(value: Option<Self>) -> Option<T>
fn convert_option_box(value: Option<Box<Self>>) -> Option<Box<T>>
fn convert_option_vec(value: Option<Vec<Self>>) -> Option<Vec<T>>
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
§impl<T> FutureExt for T
impl<T> FutureExt for T
§fn with_context(self, otel_cx: Context) -> WithContext<Self>
fn with_context(self, otel_cx: Context) -> WithContext<Self>
§fn with_current_context(self) -> WithContext<Self>
fn with_current_context(self) -> WithContext<Self>
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
Source§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
T
in a tonic::Request
Source§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
Source§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
T
in a tonic::Request
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self
, then passes self.as_mut()
into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self
, then passes self.deref()
into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
Source§impl<T> Serialize for T
impl<T> Serialize for T
fn erased_serialize(&self, serializer: &mut dyn Serializer) -> Result<(), Error>
fn do_erased_serialize( &self, serializer: &mut dyn Serializer, ) -> Result<(), ErrorImpl>
§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref()
only in debug builds, and is erased in release
builds.